TAMKO ROOFING – ROOFING – OUR TOP-RATED PRODUCTS
Tamko Roofing Products | Tamko Building Products | Home Builders & Contractors | Long Island | New York
At Allers Lumber Company we provide today’s top-rated roofing products in the building industry. Come visit our showroom and True Value Hardware store located at 217 West Montauk Highway in Lindenhurst or give us a call at 631-226-6666.
LIBERTY™ Self-Adhering Roofing Systems are applied without torches, open flames, hot asphalt, or solvent-based adhesives and are suitable for many primed substrates. LIBERTY™ SBS Self-Adhering Base/Ply Sheet is a self-adhering modified bitumen roofing membrane intended to be used as either a base sheet for LIBERTY™ SBS Self-Adhering Cap Sheet or as a ply sheet in modified bitumen roofing systems, providing long-lasting protection on low-slope roofs.
No. 15 Underlayments
ASTM TILE UNDERLAYMENT
Accepted for use as an underlayment felt to be applied over the deck prior to the installation of concrete tile. This underlayment contains a TAMKO organic felt saturated with asphalt, then coated on both sides with a weathering-grade asphalt and surfaced with opaque granules.
No. 30 Underlayments
For use as a self-adhering underlayment prior to installation of the final roof system and as a secondary layer in areas susceptible to windblown rain and ice damming. Moisture Guard is used on roof decks, around chimneys, dormers, vents and skylights, and along rake and eave edges, valleys and ridges. Moisture Guard is used under most types of roofing, including tile, wood shake, asphalt, slate or composite shingles. It is not recommended for use under metal roofing.*
TW METAL AND TILE UNDERLAYMENT
A fiberglass-reinforced self-adhering rubberized asphalt sheet membrane with a polymer film on the surface. Features a removable treated release film on the adhesive side for convenient installation and handling. TW Metal & Tile Underlayment can be left exposed for up to 120 days and is used under metal roofs, mechanically fastened tile, slate, wood shakes, asphalt and composite shingles.
TW SEAM TAPE
A flexible, self-adhering SBS modified bitumen roof deck seam tape with a polymer film on the surface and a removable treated release film on the adhesive side. For use as a roof deck seam tape to cover all joints and seams. Provides secondary protection against water penetration at deck seams and joints.
Starter/Hip & Ridge
TAMKO® 10 INCH STARTER
A precut universal starter course shingle designed to eliminate the wasted time and material of field cutting 3-tab or roll roofing materials into starter course shingles. Comes with a factory-applied sealant to eliminate the need for plastic cement. A starter course shingle to get the job started.
Hip & Ridge
A self-contained 4-foot sectional shingle-over ridge vent designed for ventilation. Features both an external and an internal “sinewave” shaped baffle designed to help guard against wind-driven rain and slow infiltration. Each section also contains integrated end plugs located every foot to reduce scrap when splicing.
RAPID RIDGE® VENT
A self-contained ridge-vent product on a roll that can be installed with a nail gun. Made with a two-layer composite consisting of a nylon-polyester, nonwoven, non-wicking fabric. Heat-bonded to a compression-resistant open-nylon matting of three-dimensional construction. Requires no baffles, metal connectors, end caps or special filters. Capped with roofing shingles and completely hidden.
SA BASE AND CAP
Cap: A lightweight, flexible, dual-coated, SBS-modified cap sheet constructed with a nonwoven polyester mat, self-adhering adhesive and a split removable release film on the adhesive side. It is surfaced with ceramic granules to help protect from ultraviolet degradation.
Base: A flexible, fiberglass-reinforced, self-adhering rubberized asphalt sheet membrane with a polymer film on the surface and a removable treated split release film on the adhesive side.
FIBERGLASS SLATE SURFACE ROLL ROOFING
A choice for low-sloped residential roofs. Applied using TAMKO® Cold-Method and Lap Cement or TAMKO Plastic Roof Cement. Available in a variety of colors to complement existing shingles and building materials. Used as the primary roof covering for low-slope residential applications with minimum slopes of 2″ or 12″.
SLATE SURFACED ROLL ROOFING
A choice for low-sloped residential roofs. Applied using TAMKO® Cold-Method and Lap Cement or TAMKO Plastic Roof Cement. Available in a variety of colors to complement existing shingles and building materials. Used as the primary roof covering for low-sloped residential applications with minimum slopes of 2″ on 12″ or as flashing material.
Allers Lumber Company #1 Caulking & Sealant Supply Company on Long Island & True Value Hardware Store!
Call 631-226-6666 | 217 West Montauk Highway Lindenhurst | Suffolk & Nassau County